1、在裝載機使用之前，駕駛員及有關人員必須耐心認真的閱讀永保機械提供的使用說明書或操作保養手冊，并且在實際操作中按使用說明書規定的事項去做，否則將帶來不必要的麻煩。
Before using loaders, drivers and related workers must be patient and carefully read the instruction manual supplied eternal machinery or operating and maintenance manuals, and matters in practice by using the instructions provided to do otherwise would cause unnecessary trouble.
2、駕駛員的穿戴應該利索，符合安全標準，以保證駕駛?cè)藛T的安全。
The driver should be neatly dressed, meet safety standards to ensure the safety of the driver.
3、施工時警告標志的設置必不可少，尤其是在危險區域。
Warning signs of construction set is essential, especially in hazardous areas.
4、當駕駛?cè)藛T喝酒或者疲勞時，應該禁止工作，安全第一。
When the driver when drinking or fatigue should be prohibited from working, safety first.
6、在上下裝載機時，應該在裝載機停穩之后，切勿輕心大意。
When the upper and lower loader, loader should then stop, never mind the effect of light.
7、在維修裝載機時，如果需要舉臂，一定要保證舉臂不會落下后再進行人工維修。
When servicing the loader, if necessary lifter arm, make sure not to fall again elevated plus manual maintenance.
8、在使用裝載機前，一定要檢查并確保所有的顯示燈正常，尤其要檢查好轉向燈及制動顯示燈是否正常顯示。
Before using loaders, be sure to check and make sure that all display lights properly, in particular, to check the brake lights and turn a good indicator whether the normal display.
9、在裝載機行駛過程中，一定要清除裝載機在行走道路上的故障物，例如鐵塊、鐵釘之類的東西，以免扎破輪胎。
In the process of moving the loader, the loader must be clear on the matter to walk the road of failure, such as iron, nails and the like, so as not to puncture tires.
10、先取走電鎖鑰匙，然后關閉電源總開關，最后關閉門窗。
Electric lock key is removed first, then turn off the power switch, and finally close the doors and windows.

山東裝載機：http://m.juzhen5.cn/